First, press the power button to turn on the OneKey hardware wallet, and follow the prompts to set the system language.

Press any key to enter the interface. Select [Create] to create a new wallet, follow the on-screen prompts to start creating a new wallet, click [Continue], and select the number of recovery phrases; here we will use 12 as an example.

Follow the prompts and copy the mnemonic words. The seed phrase is your only way to recover your wallet. Please keep it well and do not record it on any electronic device, nor spread it or record it on any network channel to ensure asset security. After copying is complete, follow the prompts to complete the mnemonic check.

Next, you need to set your own PIN code, which is similar to a bank card withdrawal code. Numbers 1-9, no 0. Note that if you only set 6 digits, you can select √ on the 7th digit.
​Important: When you set the PIN code, you must remember it. You will need the PIN code to unlock the hardware wallet. Entering the wrong PIN code 10 times will cause the hardware wallet to reset.
After that, it indicates that the wallet has been created successfully, and it can be used by connecting OneKey desktop, OneKey browser connection, or OneKey App.

The recovery phrase is your only way to recover your wallet. Please keep it well. Do not record it on any electronic device, and do not spread or record it on any network channel to ensure the security of your assets.

After activation, we need to verify the recovery phrase to ensure that your recovery phrase is written correctly and can be used to restore your address. The steps are mainly as follows:

To do this, follow these steps:

Open the official OneKey website https://onekey.so/download , select the corresponding operating system version for your computer to download, and follow the prompts to install. (The following is a Win 10 example)

Use the data cable to connect the activated hardware wallet to the computer, select [Create Wallet] - [Hardware Wallet] on the desktop, enter the PIN code on the Classic, and complete the connection.
Note: Some MAC computer users may need to use a USB converter port for connection.

If the Desktop remains in the following state, please check your hardware wallet's connection to your computer. You can try unplugging the device or changing the USB cable/port. Sometimes the cable may show it is powered, but the transmission voltage is unstable and the device is still not recognized.

You can also open the Bridge status page: http://127.0.0.1:21320/status/ to see if this page is displayed correctly. If it doesn't open, download and install the Bridge at https://onekey.so/download?client=bridge.

After connecting to the Desktop, the first account address will be displayed by default. Click [Receive] to record the receiving address.

Then, we will verify the address. Keep the mnemonic phrase you wrote during activation. Then, press any key on the hardware wallet to enter the selection interface, select Security, and then select Reset to reset the device. After the reset is complete, the Classic will return to its inactive state.

Press any key to enter the interface, select Restore to restore the wallet, enter the mnemonic phrase you wrote previously, and verify it. After completion, you will need to set the hardware wallet PIN code again. After setting is complete, the wallet is successfully restored.

At this point, open the Desktop, select [Menu] - [App Cache] to delete the previous record.

Then go back to the welcome page and repeat the previous steps. Select [Create Wallet] - [Hardware Wallet], enter the PIN code on the Classic and connect to complete, then select [Receive] - View Receiving Address.

Check if the address at this time is the same as the one recorded before. If the addresses are the same, the verification is complete and the recovery phrase corresponds to the address.

Here you have completed your hardware wallet setup.