Get started with OneKey Pro

This guide will walk you through the process of setting up your OneKey Pro hardware wallet, empowering you with the capability to manage your crypto assets securely.

Please note: Before diving into the setup process, it's crucial to conduct a quick check of the packaging and holographic seal to ensure the integrity of your device. If you detect any signs of tampering, refrain from using the device immediately. Contact OneKey Customer Support to request assistance, and we will do our best to arrange a replacement for you.

What you'll need

  • OneKey Pro
  • OneKey App Desktop downloaded and installed
  • Recovery sheet supplied in the box

Process

Please note: This guide focuses on the essential steps to get you started swiftly and does not cover the setup of advanced features such as Fingerprint Authentication, KeyTag Backup, and AirGap Mode. You can easily activate these additional functionalities manually once the initial setup is complete.

Step 1: Power on and Select Language
  • Press and hold the power button for 3-4 seconds to turn on your OneKey Pro.
  • Choose your preferred system language by following on-screen instructions.
Step 2: Create a New Wallet
  • Select "Create New Wallet" and press "Continue" to start initializing a new wallet.
  • Select the number of recovery phrase word (e.g., 12).

step2.png

Step 3: Set a PIN Code
  • Read on-screen instructions to enable PIN Protection and press Continue.
  • Enter new PIN code and select ☑️ to complete.
  • Enter PIN code again and select ☑️ to proceed.
  • Press "Continue" when "Wallet is Ready" is displayed.

step3.png

 

Security Tips

  • The PIN code is used to unlock your device.
  • Ten incorrect PIN entries will reset the hardware wallet.
  • Avoid using any devices with pre-set PIN codes or recovery phrases.
  • Contact OneKey Customer Support in case of doubt.
Step 4: Validate Recovery Phrase
  • Use the blank recovery sheet to write down your 12 seed phrases as instructed on the screen.
  • Write down the "Recovery Phrase #1". Verify that you have copied it correctly in position #1.
  • Repeat the process and verify each word's correctness in its designated position. Press "Continue".
  • Press "Continue" to enter Seed Phrase Validation process when "Almost Done" is displayed.

step4-1.png

  • Validate your written seed phrases by selecting the correct word when prompted on the device screen.
  • Repeat the process until "Verified" is displayed, and then press "Continue".

step4-2.png

 

Security Tips

  • The seed phrases are the only way for you to recover your assets.
  • Never make a digital copy of your seed and never upload it online.
  • Please keep it safe.
Step 5: Connect to the OneKey App
  • Scan the QR code or head to 🔗 onekey.so/download to download and install the OneKey App desktop application corresponding to your opreating system (macOS, Windows, Linux).
  • Connect your OneKey Pro to the computer using a USB cable.
  • Start the OneKey desktop application and select "Connect Hardware Wallet".

pro-app-connect.png

Step 6: Check Wallet Address
  • Confirm and connect your device.
  • Enter the PIN code of your OneKey Pro device.
  • Click "Receive" - "Check Address" in the OneKey desktop application.

pro-app-receiveAddr.pngpro-app-checkaddr.png

  • Confirm on your OneKey Pro device.
  • Check the address for your OneKey Pro wallet created in the previous steps.
  • Congratulations! Your OneKey Pro wallet is ready to use. 

Related articles

Authenticate OneKey Pro

Was this article helpful?
0 out of 0 found this helpful