Method for Touch entering Storage mode

The Storage mode is only used for troubleshooting under the guidance of official customer service personnel. Please do not perform this operation in daily use to avoid unknown device malfunctions.

  1. Press and hold the power button to turn off.
  2. To power on the device, press and hold the power button while it is in the shutdown state.
  3. When you see the OneKey LOGO appear on the screen after powering on, release the power button for 1-2 seconds, then hold down the power button without releasing it and slide your other fingers from the bottom to the top of the screen (repeat this action several times).
  4. Until the device screen displays "USB Mass Storage Mode" (as shown in the image below), it indicates that you have successfully entered Storage mode.

Was this article helpful?
0 out of 1 found this helpful