Windows 电脑驱动安装出现的问题及解决方法

When the OneKey hardware wallet first connects to a Windows computer, it may happen that the desktop of the OneKey computer stays on the connection interface and cannot be successfully connected.

_________.jpg

You can try the following methods first:

1. Please turn off computer butlers such as 360 Security Guards first

2. Try to replace the USB-C data cable and the computer USB interface

3. Restart the computer and try to connect again

 

If you still cannot connect after trying, you can open the Device Manager according to the following steps to check the driver problem:

 

In the search box on the taskbar, type Device Manager, thenselect from the menu.

______the_Device_Manager_.png

 

查看通用串行总线设备

_0.jpg

1. If something happens: a yellow triangle exclamation mark appears on the ONEKEY Interface, indicating that the driver is abnormal, and the driver needs to be reinstalled:

Go to https://zadig.akeo.ie/ to download and install, and choose to allow it to run.

z.jpg

Open the Zadig software and make a selection

___2021-04-15_092517.jpg

Click Options, check List ALL Devices

___2021-04-15_092532.jpg

Select from the drop-down list【ONEKEY Interface (Interface 0)】

_1.jpg

Select from the list of drivers WinUSB (v6.1.7600.16385),then click【Install Driver】

_2.jpg

After the installation is complete, please try to connect again.

Was this article helpful?
0 out of 0 found this helpful